Shenzhen Branch-Building Material Co., aerated concrete block is a lightweight porous, thermal insulation, good fire performance, can be nailed, sawed, planed and has a seismic capacity of new building materials. Aerated concrete block adaptable according to different local materials, to tailor-made different conditions. Alternatively raw river sand, fly ash, ore and other aerated concrete blocks, according to local conditions. And can recycling, environmentally friendly, the real turning waste into treasure. Aerated concrete equipment made out of aerated concrete block, the strength values ??are relative to Huizhou aerated concrete block certain terms of water content, called the reference moisture content, moisture content and scope of the reference intensity States do not do the same, for example: Germany, the EC and the UK benchmark standards for the moisture content requirements ((6 ± 2)%, the starting point is that the rear wall of the final product is 2% to 8% moisture content exist; In Sweden, places aerated concrete block air-dry state as a benchmark, that moisture content of (10 ± 2)%; while in China, when the compressive strength rating, based on the GB / T11969-2008 " autoclaved aerated performance test methods "-" ". (GB / T11971-1997" compression testing requirements for moisture content of 8 to 12% of aerated concrete performance test method "provides strength products should be quality water rate of 25% -45 % water content test next stage of strength and stability, or 25% -45%, which is the actual wall of water status varies greatly Dongguan aerated concrete blocks, thus affecting the quality assessment of aerated concrete compressive strength, has been annulled ) Shenzhen aerated concrete block factory outlets, Foshan aerated concrete block aerated concrete block, aerated concrete blocks supplier - Preferred Materials Co., Ltd. Shenzhen Branch-aerated block early care and cutting pouring! After the mold conveyor chains push early raise gas chamber made the initial setting, the room temperature is 50 ~ 70 ℃, the beginning of raising the time of 1.5-2 hours, beginning with a sling after raising the mold frame and body hanging together to advance Place the pot bottom of the cutting table. Remove the mold frame cutting machine that is to be cross-body, slitting, face milling header, mask hanging back operation mode the car manual cleaning and degreasing, then hung to die the car for the next set of die casting, good body after cutting the floor along with kettle to the pot with a crane hanging car stacked two layers, the interlayer has four support, a number of tank car series as a group. Shenzhen aerated concrete Block | Aerated concrete block | Branch-building materials provided by the Shenzhen Branch-Building Material Co., Ltd. Shenzhen Branch-Building Material Co., Ltd. (www.keyujiancai.com) (www.keyujiancai.com) strong, credible, in. Guangdong Shenzhen, brick, tile and brick industry has accumulated a large number of loyal customers. The company better work attitude and continuously improve innovative ideas will lead the Branch-building materials into the brilliant and you work for a better future!