③ at room temperature using ordinary mortar aerated blocks to be watered adequately moist, aerated with a special mortar masonry can not watering. ④ best to use special mortar aerated masonry mortar, mortar joint is generally not more than 15mm Dongguan lightweight bricks, masonry wall after the application of the original mortar joints to be even Maoming lightweight bricks inside and outside, to make mortar joint is not full phenomenon. ⑤ infilled blocks should stay out of the beam bottom 30-50mm gap, longitudinally with each 500mm wedge tight, then at the second caulked with mortar mix. Brick is the use of foam cement foam of small particles and cement mixing condensed Hainan lightweight bricks, lightweight, insulation, noise, fire high-performance, but also because of the use of small diameter greatly reduce the cost, non-load-bearing walls Ideal supplies. Autoclaved foam concrete blocks are mainly made of cement, slag powder, river sand for the production of raw materials, through the pressure of the air after mixing foaming, to force air into the mix in the mixing slurry type, poured concrete structure microbubbles molded by autoclave The reaction produced by other processes, is an environmentally friendly, energy-saving materials and stable new wall materials. Use autoclaved foamed concrete brick wall materials made of lightweight brick buildings, built for two years after testing, quality, meet the state quality, noise, energy, fire and other standards. Shenzhen is also a non-load-bearing walls of brick lightweight bricks, lightweight bricks, the preferred Branch-building materials provided by the Shenzhen Branch-Building Material Co., Ltd. Shenzhen Branch-Building Material Co., Ltd. (www.keyujiancai.com) (www.keyujiancai.com) strong, credible, in Shenzhen, Guangdong brick, tile and brick industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Keyu building materials into the brilliant and you work for a better future!