This chapter applies to sintering hollow bricks, autoclaved aerated concrete blocks, lightweight aggregate concrete small hollow blocks and other masonry infill walls. 9.1.2 masonry infill walls, lightweight aggregate concrete small hollow blocks and autoclaved aerated concrete block product age should not be less than 28d, aerated concrete wall panels, autoclaved aerated concrete block moisture It should be less than 30%. 9.1.3 autoclaved aerated concrete block in the transport and stacking should prevent rain. 9.1. 4 small water absorption of lightweight aggregate concrete small hollow blocks and autoclaved aerated concrete block using a thin gray masonry construction method, the aerated concrete wall construction techniques, before laying it should not pour (spray) wetted with water; in the case of dry and hot weather, the smaller of the water absorption of lightweight aggregate concrete small hollow block masonry water should be moist before. Aerated concrete wall Caution: When aerated concrete panels that kettle higher moisture content, the board should be stored at the plant more than five days before the factory. Transport handling aerated concrete panels application-specific tools, transport should adopt binding measures or good packing and shipping. Flat roof should use direction. Panels should be placed on its side, stacking height should not exceed 3m. Stacking area should be solid, flat, dry, lightweight aerated concrete wall panels, when stacked plates shall not directly contact with the ground. Roof stack height should be less than 1.5m, need to put the pad strip between the stack, the plant shall not exceed a total height of stacked 6.5m. Outdoor storage should have rain measures. Aerated concrete wall panels, aerated concrete block - Preferred Shenzhen Branch-Building Material Co., Ltd.!