According to GB50003-2001 "masonry structures design" can be seen, the design value of the compressive strength of autoclaved lime sand brick and sintered common brick compressive strength design values ??are the same, the difference is autoclaved sand-lime brick intensity level does not C30; when the span of not less than 7.5m of sand-lime brick masonry under the beam adjustment factor of 0.9, which is the difference between sintered common brick, when the level of construction quality control for B grade, light brick, GB50003-2001 given steam pressure sand-lime brick design value of shear strength and shear strength of sintered common brick design value, it is easy to see the shear strength of autoclaved sand-lime brick is 0.7 times the sintered common brick. (1) sand-lime brick production using natural Nature Conservancy, in the early stages of an appropriate amount of water conservation, there must be a certain period of the drying process to ensure that sand-lime brick factory when the relative moisture content to meet the requirements. (2) to move out of sand-lime brick molding machine, light brick okay, it should be placed there in the rain facility code, ventilated shed; if open dumps, lightweight bricks, waterproof cloth covering the top surface of the application, and to keep side ventilation smooth. Bottom support pad with wooden pallets, light brick, not allowed to be directly attached to the stack. Grade sand-lime brick products should be stacked separately, and sets the flag. Stack height should not more than 1.6 meters. Transportation, loading and unloading (3) sand-lime brick, is strictly prohibited throwing and dumping. Enter the construction site, should the product grades were neatly stacked, sealed waterproof cloth, to prevent the sun and rain.