Good design optimization. In order to reduce the adverse effects of temperature stress temperature difference of the upper wall of aerated concrete wall, set a steel or reinforced concrete walls with a wall with a window sill along the inner walls and gable ends of buildings bay. Critical Control cracks on top wall is to reduce the temperature difference between the roof and the wall. Therefore must use insulation and insulation, the insulation layer thickness eaves must meet the requirements to allow the temperature difference. Meanwhile, manufacturers of aerated concrete wall panels, insulation should be paved, with no gap in the eaves. It should be set at the appropriate parts of the roof separated seam. All the layers of the reinforced concrete sill sill beams, aerated concrete wall panels price, in order to reduce the pressure difference caused by cracks. While improving the bottom sill under masonry mortar strength grade. If in the case of uneven ground, the aerated concrete wall equipment, to increase the stiffness of the ring beam, and in the bottom sill of the second and fourth wall cracks each set Φ4 skin gray steel spot welding mesh, for control the generation of vertical cracks. Aerated concrete wall applications: In addition to use as roof, the aerated concrete wall can be divided into aerated concrete exterior wall of the plate and partition board types, mainly for non-load-bearing external walls of industrial and civil buildings and the inner wall. It can also be used to assemble wall panels, used as a single or multi-industrial buildings and the external walls of public buildings and residential buildings. Aerated concrete wall panels, aerated concrete block - Preferred Shenzhen Branch-Building Material Co., Ltd.!